Cleats and Accessories

The specially curved base is designed for fitting onto tubes from 29 to 32mm diameter. (1 1/8" to 1 1/4" diameter).Available in standard silver or ...

Rope jammers and stoppers have a stainless steel frame and ribbed aluminium base plates for maximum durability. Narrow profiles facilitate efficien...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for throug...

V-Cleats are a simple solution to cleating lines under moderate loads. Applications: Control lines on dinghies and catamarans  Materials: PTFE impr...

The CL234 makes it simple to hang fenders. It is easy to adjust so your fenders are always positioned correctly. The cleat stays on the rope so not...

V-Cleats are a simple solution to cleating lines under moderate loads.  Applications: Control lines on dinghies and catamarans  Materials: PTFE imp...

Aids rope alignment. Tapered pad for CL205, CL220, CL239 and CL240.Features:Material: PolypropyleneDimensions: 131mm x 45mmBolt Size: M8Screw Size:...

The bottom roller of the Clamcleat® C230AN allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface.  Can also be ri...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL201 and CL219. Technical Details Rope S...

With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light ...

With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light ...

The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To releas...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Available in silver or hard anodised finishThe principle of ...

Low profile on flat surfaces. Also ideal for vertical surfaces. Portside cleat (see CL213 for starboard side) Marine grade black nylon.   Features...

Low profile on flat surfaces. Also ideal for vertical surfaces. Portside cleat (see CL214 for Port side) Marine grade black nylon.   Features: Rop...

The Clamcleat® C211MK2AN is a neat, compact alloy cleat with many uses for sailing, kitesurfing, sports equipment and industrial applications. Man...

The CL207 is a cost effective cleat that has a low profile on flat or vertical surfaces. One of the first non-marine uses for Clamcleat® produc...

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits medium C-Cleat and T-Cleat...

The CL206 is a cost effective cleat that has a low profile on flat or vertical surfaces.One of the first non-marine uses for Clamcleat

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release.The cleat is maufactured from UV resistant...

One of our most popular cleats.The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatica...

The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To releas...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Ensures correct alignment of control lines into the cleat.       Applications: Suits medium C-Cleat and...

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits large C-Cleat and T-Cleat ...

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world. Its tough Hardkote-anodised pawls and base are spec...

Wire fairleads maintain a low profile while holding the line close to the cleat. Use the HK298 wire fairlead with the HK150 and HK365 cleats to pla...

Eyestraps provide a fairlead on cams and hold the line at the cleat.Features: Height above cam: 12mm Length: 36mm Width: 11mm Weight: 4.5g Fastener...

Riser/Curved surface adaptor, suits medium C-Cleats and T-Cleats Weight: 30g

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Harken's 280 Offshore Cam-Matic is designed to complement the Midrange block series.It will accommodate line to 5/8" (16mm) and serves well in high...

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings. Specification...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world.Its tough Hardkote-anodised pawls and base are speci...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Top Guide to suit Selden CC27 Cam Cleat (433-101-01R)   Rope capacity:  3 - 7 mm Hole spacing:  27 mm Weight:  3 g

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical. Carbon matrix pawl...

Seld ©n cam cleats c-c 27 and 38 mm are made of carbon fibre reinforced polyetherimide. This material is selected for its high resistance to fricti...

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical.Carbon matrix pawls...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees. The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. E...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Rope Fairlead to suit CC27 Clam Cleat (433-101-01R) Rope capacity:  3 - 7 mmHole spacing:  27 mmWeight:  14 g