Products

Fitted to the rear wall of the cockpit to hold the hiking strap.

Commonly known as the bung, this is the screw in plug for the hole on the aft of the boat. Stamped with RWO it suits most of the newer Laser hull.

This fairlead is the aluminium version of the fairlead used on the stern of the boat to provide maximum turning points for the traveller. They are ...

ILCA approved block set produced by Harken. Set includes: traveller double block; boom beckett block; and single boom block

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

Lower Mast Section to suit the Laser 4.7. Comes complete with all fitting, ready to put straight onto the boat.     *This item is considered bulky ...

ILCA 4 / Laser 4.7 class approved Dacron mainsail: includes folded bag; ILCA logo.   NB - Battens & sail numbers must be ordered separately.

The Laser 4.7 uses short pre-bent lower mast to maintain a balanced helm and a sail area that is 35% smaller than the Laser Standard. It is ideal f...

The Laser Radial is a Laser with a smaller sail and a shorter mast. The bendy mast and radial cut sail allow you to go out in stronger winds and st...

The Laser Radial Carbon Bottom section has just been released.This section will be class legal for cat 1 and cat 2 events after the Tokyo Olympics....

ILCA 6 / Laser Radial class approved Dacron mainsail:  includes folded sail bag; ILCA logo.   NB - Battens & sail numbers must be ordered sep...

Lower Mast Section to suit the Laser Full Rig.Comes complete with all fitting, ready to put straight onto the boat.   *This item is considered bulk...

ILCA 7 Mk II (Laser Standard) class approved Dacron mainsail  Bi radial construction Larger window Optimized patching to eliminate creases and imp...

The Gold Standard in Single-handed sailing Laser sailing is an investment in skills that will last you a lifetime, skills that apply to any boat yo...

Battens for ILCA sails. Models:ILCA 4 & 6 sail (Laser 4.7 & Radial) 2 large battens; 1 small batten; and includes batten ends. ILCA 7 MkI...

The mainsheet block situated at the end of the rear of the boom.  Older non-bearing style. Order in item

The large block used for in the mainsheet system, which is connect to the traveller block.   Older non-bearing style. Order in item 

The single pulley block, which is situated towards the forward end of the boom, feeds the mainsheet from the boom to the ratchet in the boat.   Old...

This block runs along the traveller at the rear of the boat and connects to the large traveller block giving the traveller it's functionality.   Ol...

An integral part of the boat, the boom comes with all fittings for mainsheet, outhaul and vang systems. Fits ILCA 4 (4.7), ILCA 6 (Radial) and ILC...

Facilitates the connection between boom and mast via the gooseneck while preventing wear on the boom and gooseneck.

Fits inside boom to provide support and strength.