Spar and Spinnaker Pole Fittings

The RWO's comprehensive range of pole ends are lightweight and strong to assist the crew in the most demanding operations of spinnaker handling.The...

5mm (3/16") dia. clevis pin, 76mm (3") long, 2 x 5mm (3/16") fixing hole.Applications:Used for terminating wire riggingMaterial:Grade 316 stainless...

Suit external mounting on solid or tubular sections. Push-on beak design allows attachment to the pole ring without manually opening the pin. Attac...

St/St ball bearing swivel unit. Fork & fork take-off with 6.4mm (1/4") dia. Pins. Overall height 80mm (3 1/8") Breaking Load (kg) 1700Weight (g...

Fork-Fork, incorporating forestay guard, 7.9mm dia. pinsMaterial:Stainless steelFeatures:Breaking Load: 2600kgWeight: 240g

Ball bearing swivel unit and furling line lead arm. Fork & fork take-off with 7.9mm (5/16") dia. Pins. Overall height 114mm (4 1/2") Applicatio...

SnapFurl system for boats 16' to 24' (4.9 - 8.5m). The smallest over-the-headstay systems utilise Torlon bearing races, composite torque tube and t...

Pin type gooseneck with slide to fit sailtrack 9.5mm diameter and larger.Sail and downhaul secured with screwed pins in swivelling yokes.Weight: 156g

Fixed band pin type gooseneck to fit masts 60mm to 90mmPin 9.5mm diameter with 6.3mm shackle pin tack fitting.Weight: 172g

Fixed Band Pin Type Gooseneck to fit masts 60mm to 90mm.   Pin 9.5mm diam 6.3mm shackle pin tack fitting

Boom gooseneck.Tube Diameter to suit 3/8" diam. (9.5mm) gooseneck pin.Weight: 38g

Fixed gooseneck, heavy duty, 13mm diameter aluminium pin. Extruded aluminium base.RF2524 is a new heavy duty gooseneck. This lightweight allow vers...

89mm to 127mm range with direct end fastening by means of forked end to chainplates or adjustable gunwale slides.Weight: 50gBreaking strain: 800kg

Allows 51mm adjustments in 3mm increments.Weight: 36g.Breaking strain: 800kg.

Used in conjunction with stay adjusters and other fittings in wire rigging systems.   Applications:Typically used on dinghies, catamarans and small...

Used in conjunction with stay adjusters and other fittings in wire rigging systems.   Applications:Typically used on dinghies, catamarans and small...

Typically used on dinghies, catamarans and small keelboats.Material:Grade 316 stainless steel Features: Pin

Typically used on dinghies, catamarans and small keelboats.Material:Grade 316 stainless steel Features: Pin

Used in conjunction with stay adjusters and other fittings in wire rigging systems.   Applications:Typically used on dinghies, catamarans and small...

Used in conjunction with stay adjusters and other fittings in wire rigging systems.   Applications:Typically used on dinghies, catamarans and small...

Reduces the risk of losing the stay when adjusting rig tension.Applications:Typically used on dinghies, catamarans and small keelboatsMaterial:Grad...

Typically used on dinghies, catamarans and small keelboats.Material:Grade 316 stainless steel Features: Pin

Used in conjunction with stay adjusters and other fittings in wire rigging systems.  Applications:Typically used on dinghies, catamarans and small ...

The sliding sleeve offers wide opening, and quick release and tensioning. Suits 4mm (5/32") diam. wire.Applications:Range offers suitability for al...

The sliding sleeve offers wide opening, and quick release and tensioning. Suits 4mm (5/32") diam. wire. Applications: Range offers suitability for...

64mm (2 1/2") long. 4 x 5mm (3/16") dia. fixing holes.Applications:Typically used on dinghies, catamarans and small keelboats Material:Grade 316 st...

8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing hole.  Applications:Used for terminating wire rigging   Materials:Grade 31...

6.4mm (1/4") dia. clevis pin, 51mm (2") long, 1 x 6.4mm (1/4") fixing hole   Applications:Used for terminating wire rigging  Material:Grade 316 sta...

Plates suit 50mm (2") webbing.   Applications:   Dinghy hiking straps   Materials: Grade 316 stainless steel   Features: Width: 16.0mm Len...

Locks halyards off on a talurit / nico press swage.  Applications:Used for terminating wire rigging   Material:Grade 316 stainless steel   Weight: 5g

55mm (2 1/4") long. 4 x 5mm (3/16") dia. fixing holes.Applications:Typically used on dinghies, catamarans and small keelboats Materials:Grade 316 s...

Threaded swage terminals (2.5-26mm wire) have rolled right hand UNF threads for greater strength. Applications: For wire terminations Suit Ronstan ...

For wire end termination allowing movement in one plane only. Applications: For wire end termination to suit imperial wires.Commonly use for sides...

For wire end termination allowing movement in two planes to minimise the fatiguing effects of cyclic action. Commonly used for sidestays, forestay,...

Swage eyes are simple and effective wire end termination. Commonly used for sidestays, forestays, lowers and diamonds on all sizes of crusing and ...

Slotted attachment hole allows shackle body to be passed through. 8 x 5mm (3/16") dia. fixing holes.Applications:Typically used on dinghies, catama...

6.4mm (1/4") ferrule eye, 38mm (1 1/2") long, 1 x 5mm (3/16") fixing hole.  Applications:Used for terminating wire rigging   Materials:Grade 316 st...

80mm (3 1/8") long, 65mm (2 1/2") wide. Material dia. 6.4mm (1/4"). 2 x 6.6mm (1/4") dia. fixing holes.Applications:Typically used on dinghies, cat...

T- Ball are made from high quality Stainless

T- Ball are made from high quality Stainless Suits 5mm and 3/16 dia wire.

T- Ball are made from high quality Stainless Suits 4mm or 5/32" wire

T- Ball are made from high quality Stainless Suits 3mm or 1/8" wire.

 T- Ball are made from high quality Stainless Suits 2.5mm or 3/32" wire

T- Ball are made from high quality Stainless Suits 2mm or 5/64" wire

T- Ball are made from high quality Stainless

Backing plates are internally mounted for use with T Ball shroud fittings. T-Balls must be turned 90 degrees to be removed from the backing plate. ...

Backing plates are internally mounted for use with T Ball shroud fittings. T-Balls must be turned 90 degrees to be removed from the backing plate. ...

To suit RM87 pin fitting. Spring loaded cap prevents damage when pole skies or dips.   Used by Australian Sharpie's