Products

55mm (2 1/4") long. 4 x 5mm (3/16") dia. fixing holes.Applications:Typically used on dinghies, catamarans and small keelboats Materials:Grade 316 s...

Contains waxes to promote high lustre and depth of colour Contains silicone to ensure long lasting shine Contains mild abrasive No-run paste form...

Swage eyes are simple and effective wire end termination. Commonly used for sidestays, forestays, lowers and diamonds on all sizes of crusing and ...

For wire end termination allowing movement in one plane only. Applications: For wire end termination to suit imperial wires.Commonly use for sides...

For wire end termination allowing movement in two planes to minimise the fatiguing effects of cyclic action. Commonly used for sidestays, forestay,...

Swivels are used in conjunction with blocks, rigging and furling systems to provide articulation and rotation.Material:Grade 316 stainless steel bo...

Swivel cleat bases permit easy cleating and releasing from any angle.Sheave can be relocated to allow the control line to feed from below.Comes com...

Swivels are used in conjunction with blocks, rigging and furling systems to provide articulation and rotation.Materials:Grade 316 stainless steel b...

Stainless steel ball bearing race. Swivels are used in conjunction with blocks, rigging and furling systems to provide articulation and rotation.Ma...

Swivel shackle bases turns a fixed head block into a swivel block. Designed to work with Dyneema Link blocks. Suits Series 40 & 55 Orbit Block

Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Feat...

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Clea...

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Clea...

Ball bearing swivel have lower friction and higher working loads than non ball bearing versions. Used in conjunction with blocks and rigging system...

Swivel cleat bases permit easy cleating and releasing from any angle.Adjustable ratchet system prevents the arm from falling to leeward. Twin rows ...

Ronstan cam cleats are strong, light and corrosion free.A multi-coil spring recessed in the upper part of the cam generates near constant torque. ...

Ronstan cam cleats are strong, light and corrosion free.A multi-coil spring recessed in the upper part of the cam generates near constant torque. T...

  A - mm   B 40.0 mm   C 28.0 mm   D 2.0 mm   ...

Essential guide for proper sail trim. Adhesive patches to ensure permanent bond with sail. High resolution fabric tails for maximum visibility.

Threaded terminal adjusters are an efficient and aesthetic means of terminating balustrade cables. Used in conjunction with the relevant sized wir...

Tiller extension retaining clip, suits 16mm (5/8") dia. tube. Material: U.V. stabilised Nylon Weight: 7gr

Tiller extension retaining clip, suits 20mm (3/4") dia. tube Material: U.V. stabilised Nylon Weight: 4gr

Suits 16mm (5/8") dia. tube. Incorporates 1/4" U.N.C.x 45mm (1 3/4") long bolt.   Material: Stainless steel    Weight: 64gr

Plates suit 50mm (2") webbing.   Applications:   Dinghy hiking straps   Materials: Grade 316 stainless steel   Features: Width: 16.0mm Len...

Grade 316 stainless steel.Features: ‚ A: 6.4mmB: 7.8mmC: 17.4mmD: 32.5mmE: 7.9mmWeight: 10g

Grade 316 stainless steel. Features: A: 6.4mmB: 11.2mmC: 20.8mmD: 35.9mmE: 7.9mmWeight: 10g

Grade 316 stainless steel.Features: ‚ A: 6.4mmB: 14.2mmC: 23.8mmD: 38.9mmE: 7.9mmWeight: 10g

Grade 316 stainless steel.Features: ‚ A: 6.4mmB: 20.5mmC: 30.1mmD: 45.2mmE: 7.9mmWeight: 10g

Fabricated Stainless Steel rudder gudgeons and pintles are robust and reliable.Pins are cross drilled to accept the RF413 retaining clip.  

Fabricated Stainless Steel rudder gudgeons and pintles are robust and reliable. Pins are cross drilled to accept the RF413 retaining clip.

Integrated roller allows easy 2:1 adjustment. Self cleating tooth design. Materials: Hardcote anodised alloy Weight: 46g

Comfortable grip nylon trapeze handle.   Material: U.V. resistant Nylon.   Available in Blue and Red

Its main feature is the ergonomic grip; a soft over-moulded vertical grip with large base disc for positive orientation every time.It was originall...

Strong, UV resistant Nylon and plastic resins are used to manufacture these boating accessories, to avoid the scratching of paint and gelcoat often...

Suits up to 4mm (5/32") diameter line. Suits 2 x 5mm (3/16") fasteners.

Full 360 degree universal ball joint to suit Series 56 ratchet blocks. Applications: Mainsheet on off the beach dinghies, catamarans and sports...