Products

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Wire fairleads maintain a low profile while holding the line close to the cleat. Use the HK298 wire fairlead with the HK150 and HK365 cleats to pla...

Eyestraps provide a fairlead on cams and hold the line at the cleat.Features: Height above cam: 12mm Length: 36mm Width: 11mm Weight: 4.5g Fastener...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees. The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. E...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line unc...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Riser/Curved surface adaptor, suits medium C-Cleats and T-Cleats Weight: 30g

Ensures correct alignment of control lines into the cleat.       Applications: Suits medium C-Cleat and...

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits large C-Cleat and T-Cleat ...

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits medium C-Cleat and T-Cleat...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Ensures correct alignment of control lines into the cleat.       Applications: Suits small C-Cleat and T-CleatWeight: 10g

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

Top Guide to suit Selden CC27 Cam Cleat (433-101-01R)   Rope capacity:  3 - 7 mm Hole spacing:  27 mm Weight:  3 g

Rope Fairlead to suit CC27 Clam Cleat (433-101-01R) Rope capacity:  3 - 7 mmHole spacing:  27 mmWeight:  14 g