Products

A pad placed underneath the hiking strap plate at the rear of the centreboard case which is used to hold the centreboard in place.

The centreboard stopper is press fitted into the head of the centreboard and prevents it from slipping through the centreboard case.< <

The clew strap is one of the most effective clew tie down system in use today. The easy to use velcro strapping technique provides the strength tha...

The cunningham plate, sits at the base of the mast and acts as turning point for the mainsheet and outhaul and cunningham ropes.*Not including blocks*

The complete Cunningham Plate assembly is supplied with: ILCA Cunningham Plate; 2 x Ronstan Series 30 Orbit blocks; and 2 x wide 'D' shackles.

Updated version - heavier gauge vang key now available. Attaches the upper pulley of the vang system to the boom.

Fitted to the boom to hang the rear Mainsheet pulley

Mainsheet Hanger - keeps mainsheet against the boom when tacking and jibing.

1 Remaining Ex-Charter ILCA boats are a great way to get into ILCA sailing or to upgrade that older boat. We have an Ex-Charter PSA boat used only ...

Fitted onto the lower mast section of any rig to allow the boom to connect to the mast. Suits all three Laser sizes.

The Grabrails are notably used to grab in instances of capsizes and rolling the boat. They are located on the upper sides of the cockpit walls. Sol...

These are the New PSA / Laser hiking straps, the same straps that are supplied with new boats. Previously we have supplied them in the blue/black c...

Fitted onto the bottom of the bottom section of the mast to protect it and the hull from damage.

Fitted onto the bottom of the top section of the mast to prevent the wear of the two bottom and top section and to allow for a tight fit. Suits all...

Fitted onto the top section of the mast to protect it from damage and set a maximum length at which it can slide into the bottom section. Suits all...

Fitted onto the bottom section of the mast, below the goose neck, to attach the vang system to the bottom section of the mast. Suits all three Lase...

Fitted onto the top of the top section of the mast to protect it and the sail from damage. Also used as a boom end plug.

The outhaul sleeve is a metal clew tie down which fits around the boom and slides up and down, amazingly, with almost no friction and noise. The us...

The premium deck cover is designed to keep your ILCA deck and deck fittings away from the worst of the sun and weather. Premium covers are manufact...

The PSA / Laser Foil Bag is a handy bag for carrying almost all of your laser equipment. It will fit the rudder, centreboard, tiller and tiller ext...

The Premium hull cover is designed to keep your ILCA dinghy's hull protected when being transported and stored. Premium covers are manufactured wit...

This is the plain rudder blade that is an integral part of the boat. It facilitates steering combined with the tiller, tiller extension and rudder ...

Includes the bolt, nut and bushing to hold the rudder blade inside the rudder head

Rudder comes complete with rudder blade in rudder head connected with the rudder bushing set.