Cleats and Accessories

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Ronstan cam cleats are strong, light and corrosion free.A multi-coil spring recessed in the upper part of the cam generates near constant torque. T...

Ensures correct alignment of control lines into the cleat.       Applications: Suits small C-Cleat and T-CleatWeight: 10g

Ronstan cam cleats are strong, light and corrosion free.A multi-coil spring recessed in the upper part of the cam generates near constant torque. ...

V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purcha...

Integrated roller allows easy 2:1 adjustment. Self cleating tooth design. Materials: Hardcote anodised alloy Weight: 46g

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Clea...

Swivel cleat bases permit easy cleating and releasing from any angle.Sheave can be relocated to allow the control line to feed from below.Comes com...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Clea...

Horn Cleat, made of U.V. stabilised Nylon Features:Length: 98mmRope Diam: 5mmWeight: 15g

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Swivel cleat bases permit easy cleating and releasing from any angle. Features: Ball bearings support the cleat arm. An integral stop prevents over...

V-Cleats are a simple solution to cleating lines under moderate loads. Applications: Control lines on dinghies and catamarans  Materials: PTFE impr...

V-Cleats are a simple solution to cleating lines under moderate loads.  Applications: Control lines on dinghies and catamarans  Materials: PTFE imp...

Swivel cleat bases permit easy cleating and releasing from any angle.Adjustable ratchet system prevents the arm from falling to leeward. Twin rows ...

Horn Cleat, made of nylon.Features:Length: 76mmRope Diam: 4mmWeight: 10g

Horn Cleat, made of U.V. stabilised NylonFeatures:Length: 127mmRope Diam: 6mmWeight: 30g

Suits up to 6mm (1/4") diameter rope.Material:Stainless steelRope

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits medium C-Cleat and T-Cleat...

Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Feat...

Horn Cleat, made of U.V. stabilised Nylon. Features:Length: 203mmRope Diam: 10mmWeight: 85g

Horn Cleat, made of U.V. stabilised Nylon. Features:Length: 165mmRope Diam: 8mmWeight: 50g

Suits up to 4mm (5/32") diameter line. Suits 2 x 5mm (3/16") fasteners.

V-Cleats are a simple solution to cleating lines under moderate loads. Applications: Control lines on dinghies and catamarans  Materials: PTFE impr...

V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purcha...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Ensures correct alignment of control lines into the cleat.       Applications: Suits medium C-Cleat and...

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits large C-Cleat and T-Cleat ...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Riser/Curved surface adaptor, suits medium C-Cleats and T-Cleats Weight: 30g

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...