Dinghy Classes

300mm Sail Numbers to suit most Off The Beach Sailing boats and Trailer Sailors between 3.5m and 8.5m.   These include: ILCA 6 ILCA 7 Sharpies 505...

230mm Sail Numbers to suit most Off The Beach Sailing boats under 3.5m.   These include: Optimist ILCA 4   Colours include Blue, Red, Black (oth...

Selden composite mast tendon plug. This plug is perfectly suited to the new Sabre mast step rules. It fits the standard Sabre mast section, or Sel...

Oceansouth Sailboat Covers tailor made design to fit PACER Class (Puffin Pacer). Shock cord enclosed in hem and buckle fastening for perfect fit. ...

Binks Marine ‚ toestraps are padded for your ultimate comfort.* This item is considered bulky and may incur an additional freight charge. We will c...

These hooks are unique to the Sharpie class to enable quick attachment ‚  and detachment of spinnaker sheet.

The clew strap is one of the most effective clew tie down system in use today. The easy to use velcro strapping technique provides the strength tha...

Commonly known as the bung, this is the screw in plug for the hole on the aft of the boat. Stamped with RWO it suits most of the newer Laser hull.

The 'self bailer' or 'venturi' is situated at the rear of the cockpit where it sucks water from the cockpit above a certain boat speed. This is the...

Oceansouth Sailboat Covers tailor made design to fit Tasar Class. Shock cord enclosed in hem and buckle fastening for perfect fit. Supplied with W...

Oceansouth Sailboat Covers tailor made design to fit Sabre Dinghies. Shock cord enclosed in hem and buckle fastening for perfect fit. Supplied wit...

Oceansouth Sailboat Covers tailor made design to fit 420 Class. Shock cord enclosed in hem and buckle fastening for perfect fit. Supplied with Web...

The cunningham plate, sits at the base of the mast and acts as turning point for the mainsheet and outhaul and cunningham ropes.*Not including blocks*

Lower Mast Section to suit the Laser Full Rig.Comes complete with all fitting, ready to put straight onto the boat.   *This item is considered bulk...

Constructed of 600 D Nylon, this Optimist blade bag is made to last long. With 3 compartments for rudder, daggerboard and accessories.The rudder an...

Heavy duty Optimist rig bag from 600 polyester with two compartments.One for the sail and boom, and one for the Optimist mast and sprit.With zip cl...

Moulded nylon wear protection pads for the ILCA dinghy. Designed to stop the mainsheet blocks from damaging the deck of the boat. The wear protecto...

Oceansouth Sailboat Covers tailor made design to fit 505 Class. Shock cord enclosed in hem and buckle fastening for perfect fit. Supplied with Web...

The EZI launcher is a mast fitting that allows the use of twin spinnaker poles in dinghies and some keelboats, making the handling of a symmetrical...

The EZI launcher is a mast fitting that allows the use of twin spinnaker poles in dinghies and some keelboats, making the handling of a symmetrical...

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

Battens for ILCA sails. Models:ILCA 4 & 6 sail (Laser 4.7 & Radial) 2 large battens; 1 small batten; and includes batten ends. ILCA 7 MkI...

Facilitates the connection between boom and mast via the gooseneck while preventing wear on the boom and gooseneck.

This fairlead is the aluminium version of the fairlead used on the stern of the boat to provide maximum turning points for the traveller. They are ...

A pad placed underneath the hiking strap plate at the rear of the centreboard case which is used to hold the centreboard in place.

Fitted onto the top section of the mast to protect it from damage and set a maximum length at which it can slide into the bottom section. Suits all...

The centreboard stopper is press fitted into the head of the centreboard and prevents it from slipping through the centreboard case.< <

Lightweight aluminium Optimist trolley with stainless steel axles and solid hull supports. Supplied with Bow wow which is made of recycled environ...

These buoyancy bags from Optiparts are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of...

Optimist Mast LockStainless steel lock to secure your mast from coming out of its step when the boat is capsized. This lock has a rubber insert and...

XSP Optimist championship rudders are made of top level foam epoxy. They are stiff and durable making them the ideal choice for racing. The rudder ...

The perfect new lacing ling fo Optis.  Very low stretch, lightweight, with the ultimate in knot holding.Abrasion-resistant, cover construction, wit...

Puncture Proof Dolly wheels would suit most sailing dinghies including Optimist, Laser and 420's, among others.   Diameter: 37 cm Suitable for 25 (...

New ILCA® Lower Vang Unit   FEATURES Lowest friction ILCA® vang unit available. HHL sheave for the high load primary sheave. Easy cleating and re...

ILCA / Laser Blue Mainsheet – 7mm diameter.   * Cut to 14.5m length suitable for ILCA mainsheets