ILCA (Laser)

The complete Cunningham Plate assembly is supplied with: ILCA Cunningham Plate; 2 x Ronstan Series 30 Orbit blocks; and 2 x wide 'D' shackles.

ILCA class approved vang system with Harken blocks. The complete set includes: 1 x ILCA vang block - built by Harken; 1 x 16 mm Harken single top b...

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

The PSA / Laser Foil Bag is a handy bag for carrying almost all of your laser equipment. It will fit the rudder, centreboard, tiller and tiller ext...

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

The outhaul sleeve is a metal clew tie down which fits around the boom and slides up and down, amazingly, with almost no friction and noise. The us...

The large block used for in the mainsheet system, which is connect to the traveller block.   Older non-bearing style. Order in item 

ILCA approved block set produced by Harken. Set includes: traveller double block; boom beckett block; and single boom block

ILCA 7 Mk II (Laser Standard) class approved Dacron mainsail  Bi radial construction Larger window Optimized patching to eliminate creases and imp...

ILCA 6 / Laser Radial class approved Dacron mainsail:  includes folded sail bag; ILCA logo.   NB - Battens & sail numbers must be ordered sep...

ILCA 4 / Laser 4.7 class approved Dacron mainsail: includes folded bag; ILCA logo.   NB - Battens & sail numbers must be ordered separately.

Battens for ILCA sails. Models:ILCA 4 & 6 sail (Laser 4.7 & Radial) 2 large battens; 1 small batten; and includes batten ends. ILCA 7 MkI...

Black rubber plug for the self bailer (venturi). Has a hole Has a hole in the middle to push over the self bailer shaft.

Updated version - heavier gauge vang key now available. Attaches the upper pulley of the vang system to the boom.

The Grabrails are notably used to grab in instances of capsizes and rolling the boat. They are located on the upper sides of the cockpit walls. Sol...

Mainsheet Hanger - keeps mainsheet against the boom when tacking and jibing.

Fitted to the boom to hang the rear Mainsheet pulley

A metal fitting on the boom which connects the boom to the vang system.

Fits inside boom to provide support and strength.

An integral part of the boat, the boom comes with all fittings for mainsheet, outhaul and vang systems. Fits ILCA 4 (4.7), ILCA 6 (Radial) and ILC...

The bow eye is fitted to the bow of the boat and is used to tie the boat to something, to facilitate towing or as a place to secure the centreboard...

The hole that exists in the rear of the cockpit is used as a venturi. This brass fitting set is fitted in order to use the venturi.

A pad placed underneath the hiking strap plate at the rear of the centreboard case which is used to hold the centreboard in place.