ILCA (Laser)

Fitted onto the top section of the mast to protect it from damage and set a maximum length at which it can slide into the bottom section. Suits all...

Facilitates the connection between boom and mast via the gooseneck while preventing wear on the boom and gooseneck.

Updated version - heavier gauge vang key now available. Attaches the upper pulley of the vang system to the boom.

Mainsheet Hanger - keeps mainsheet against the boom when tacking and jibing.

Fitted to the boom to hang the rear Mainsheet pulley

A metal fitting on the boom which connects the boom to the vang system.

Fits inside boom to provide support and strength.

Fitted onto the top of the top section of the mast to protect it and the sail from damage. Also used as a boom end plug.

Fitted onto the bottom of the top section of the mast to prevent the wear of the two bottom and top section and to allow for a tight fit. Suits all...

Fitted onto the bottom of the bottom section of the mast to protect it and the hull from damage.

Fitted onto the lower mast section of any rig to allow the boom to connect to the mast. Suits all three Laser sizes.

Fitted onto the bottom section of the mast, below the goose neck, to attach the vang system to the bottom section of the mast. Suits all three Lase...