ILCA (Laser)

300mm Sail Numbers to suit most Off The Beach Sailing boats and Trailer Sailors between 3.5m and 8.5m.   These include: ILCA 6 ILCA 7 Sharpies 505...

230mm Sail Numbers to suit most Off The Beach Sailing boats under 3.5m.   These include: Optimist ILCA 4   Colours include Blue, Red, Black (oth...

The clew strap is one of the most effective clew tie down system in use today. The easy to use velcro strapping technique provides the strength tha...

The 'self bailer' or 'venturi' is situated at the rear of the cockpit where it sucks water from the cockpit above a certain boat speed. This is the...

Commonly known as the bung, this is the screw in plug for the hole on the aft of the boat. Stamped with RWO it suits most of the newer Laser hull.

The cunningham plate, sits at the base of the mast and acts as turning point for the mainsheet and outhaul and cunningham ropes.*Not including blocks*

Lower Mast Section to suit the Laser Full Rig.Comes complete with all fitting, ready to put straight onto the boat.   *This item is considered bulk...

ILCA / Laser Blue Mainsheet – 7mm diameter.   * Cut to 14.5m length suitable for ILCA mainsheets

ILCA / Laser Yellow Mainsheet – 5.5mm diameter.   * Cut to 14.5m length suitable for ILCA mainsheets

Moulded nylon wear protection pads for the ILCA dinghy. Designed to stop the mainsheet blocks from damaging the deck of the boat. The wear protecto...

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

ILCA approved and branded beckett block for the ILCA boom - produced by Harken

Facilitates the connection between boom and mast via the gooseneck while preventing wear on the boom and gooseneck.

Battens for ILCA sails. Models:ILCA 4 & 6 sail (Laser 4.7 & Radial) 2 large battens; 1 small batten; and includes batten ends. ILCA 7 MkI...

A pad placed underneath the hiking strap plate at the rear of the centreboard case which is used to hold the centreboard in place.

Fitted onto the top section of the mast to protect it from damage and set a maximum length at which it can slide into the bottom section. Suits all...

This fairlead is the aluminium version of the fairlead used on the stern of the boat to provide maximum turning points for the traveller. They are ...

Fitted onto the top of the top section of the mast to protect it and the sail from damage. Also used as a boom end plug.

The centreboard stopper is press fitted into the head of the centreboard and prevents it from slipping through the centreboard case.< <

New ILCA® Lower Vang Unit   FEATURES Lowest friction ILCA® vang unit available. HHL sheave for the high load primary sheave. Easy cleating and re...

Blended Dyneema and Polypropylene cover provides great abrasion resistance through ratchets and cleats. The Dyneema core means that you experience...

Electronic compasses are now allowed in the ILCA class. The ILCA Carbon Parts compass bracket will allow you to add the popular Raymarine T060 micr...

Oceansouth Sailboat Covers tailor made design to fit ILCA Dinghies. Shock cord enclosed in hem and buckle fastening for perfect fit. Supplied with...

1 Remaining Ex-Charter ILCA boats are a great way to get into ILCA sailing or to upgrade that older boat. We have an Ex-Charter PSA boat used only ...