Mast Fittings

Selden T-Terminal Retaining Plugs fit in the space above the T-ball fitting to hold it in place once inserted into the mast.   Suits 2.5 and 3mm T...

T-Ball Rope Eye to suit 3mm backing plates. This fitting allows you to attach rope such as Dyneema to a t-ball backing plate as you might find in y...

Backing plates are internally mounted for use with T Ball shroud fittings.   T-Balls must be turned 90 degrees to be removed from the backing plate...

5mm (3/16") dia. clevis pin, 76mm (3") long, 2 x 5mm (3/16") fixing hole.Applications:Used for terminating wire riggingMaterial:Grade 316 stainless...

Locks halyards off on a talurit / nico press swage.  Applications:Used for terminating wire rigging   Material:Grade 316 stainless steel   Weight: 5g

T- Ball are made from high quality Stainless Suits 3mm or 1/8" wire.

6.4mm (1/4") ferrule eye, 38mm (1 1/2") long, 1 x 5mm (3/16") fixing hole.  Applications:Used for terminating wire rigging   Materials:Grade 316 st...

 T- Ball are made from high quality Stainless Suits 2.5mm or 3/32" wire

Slotted attachment hole allows shackle body to be passed through. 8 x 5mm (3/16") dia. fixing holes.Applications:Typically used on dinghies, catama...

Gooseneck suitable for all sections designated by Greek letter names. ‚ All new Selden dinghy masts are fitted with our new gooseneck.Designed to r...

6.4mm (1/4") dia. clevis pin, 51mm (2") long, 1 x 6.4mm (1/4") fixing hole   Applications:Used for terminating wire rigging  Material:Grade 316 sta...

8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing hole.  Applications:Used for terminating wire rigging   Materials:Grade 31...

Backing plates are internally mounted for use with T Ball shroud fittings. T-Balls must be turned 90 degrees to be removed from the backing plate. ...

Selden Cassette Dinghy Halyard Lock. These are easier to install than the alloy halyard lock Main halyard locks are ideal at guaranteeing your main...

The Selden Heavy Duty Stainless Steel gooseneck is suitable for all Selden sections that use a round pin.  The new pin is longer and features a un...

Selden Kappa mast plug adaptor   Allows Selden mast plugs to fit Selden Kappa mast sections

Selden Cumulus mast plug adaptor   Allows Selden mast plugs to fit Selden Cumulus mast sections

Selden Proc Plug Adaptor EPS/GAM

Spinnaker pole ring (snotter fitting).Whether you need a jib stick, conventional spinnaker pole, or the 505 World Champion

Lower bracket, T-Terminal lower attachment. Designed for the composite spars, a simple to fit, wrap bracket can be used to engage lower shrouds wi...

This Selden Standard Kicking Strap Eye is suitable for most applications, including vang fittings.

Selden Wrap-Round Deck Collar Deck collar are used to prevent tube chafe on keel-step-ped masts at deck level.The Selden range contains two deck c...

Selden Alloy Dinghy Halyard Lock.Main halyard locks are ideal at guaranteeing your mainsail is always hoisted to the measurement band, with the hoi...

Carbon mast boom bracket adaptor

Proctor Side Chafe Plates Deck collar are used to prevent tube chafe on keel-step-ped masts at deck level. The Selden range contains two deck co...

Proctor Carbon Masthead Assembly. Our new design head fitting gives unparalleled functionality with standard, 2:1 and sealed head main halyard lea...

The sliding sleeve offers wide opening, and quick release and tensioning. Suits 4mm (5/32") diam. wire.Applications:Range offers suitability for al...

The sliding sleeve offers wide opening, and quick release and tensioning. Suits 4mm (5/32") diam. wire. Applications: Range offers suitability for...

Threaded swage terminals (2.5-26mm wire) have rolled right hand UNF threads for greater strength. Applications: For wire terminations Suit Ronstan ...

T- Ball are made from high quality Stainless

T- Ball are made from high quality Stainless Suits 5mm and 3/16 dia wire.

55mm (2 1/4") long. 4 x 5mm (3/16") dia. fixing holes.Applications:Typically used on dinghies, catamarans and small keelboats Materials:Grade 316 s...

For wire end termination allowing movement in one plane only. Applications: For wire end termination to suit imperial wires.Commonly use for sides...

For wire end termination allowing movement in two planes to minimise the fatiguing effects of cyclic action. Commonly used for sidestays, forestay,...

Swage eyes are simple and effective wire end termination. Commonly used for sidestays, forestays, lowers and diamonds on all sizes of crusing and ...

80mm (3 1/8") long, 65mm (2 1/2") wide. Material dia. 6.4mm (1/4"). 2 x 6.6mm (1/4") dia. fixing holes.Applications:Typically used on dinghies, cat...

T- Ball are made from high quality Stainless Suits 4mm or 5/32" wire

T- Ball are made from high quality Stainless Suits 2mm or 5/64" wire

T- Ball are made from high quality Stainless