Selden Fittings

Spare Nut and bolts for the PROCTOR SPREADER ASSEMBLY

Fits over the Selden 25mm pole end. Suits a 32 mm OD tube.

Replacement barrel for Original Spreader System

The EZI launcher Outboard Pole End is designed for the outboard end of the pole in conjunction with the EZI Launcher twin pole setup. ‚ Main body ...

Spinnaker pole ring (snotter fitting).Whether you need a jib stick, conventional spinnaker pole, or the 505 World Champion

Lower bracket, T-Terminal lower attachment. Designed for the composite spars, a simple to fit, wrap bracket can be used to engage lower shrouds wi...

This Selden Standard Kicking Strap Eye is suitable for most applications, including vang fittings.

Proctor Pole Launcher (Complete Assembly).The Spiro pole launcher fitting is the best around. Used mainly in the 505's, flying 15's and FD's

Selden Spinnaker Halyard Sheave Box with Ball Bearing Sheave. This Selden Spinnaker Halyard Sheave Box is equipped with 25 4mm stainless steel ball...

These these Jib Halyard sheave boxes now incorporate a black Aluminium sheave. ‚ This sheave box is manufactured from high -load composite ‚  mater...

Selden Wrap-Round Deck Collar Deck collar are used to prevent tube chafe on keel-step-ped masts at deck level.The Selden range contains two deck c...

The Proctor jib halyard sheave boxes are suitable for any mast section.This sheave box is manufactured from high -load composite ‚  material offeri...

Proctor Old Style Square Pin and Toggle.

Selden boom sliders are designed to allow mainsheet blocks to attach directly to the eye, and locate directly into the in-boom track with screw pad...

Selden Alloy Dinghy Halyard Lock.Main halyard locks are ideal at guaranteeing your mainsail is always hoisted to the measurement band, with the hoi...

Carbon mast boom bracket adaptor

Proctor Side Chafe Plates Deck collar are used to prevent tube chafe on keel-step-ped masts at deck level. The Selden range contains two deck co...

Proctor Carbon Masthead Assembly. Our new design head fitting gives unparalleled functionality with standard, 2:1 and sealed head main halyard lea...

Selden Gooesneck pin and toggleReplacement pin for 508-261-01 & 508-261-02 ‚ All new Seld ©n masts are fitted with our new design gooseneck. ...

Replacement clamp plate ‚ and bolt for: 511-714-02 511-714-03 ‚ You can also add an extra clamp to the 511-714-02 to make it suitable for a vang eye.

Inboard boom plug suitable for: Olympus 2628 2633 2632 ‚ The dinghy range of boom end fittings have been designed to provide an unparalleled level...

Outboard boom plug suitable for: Olympus 2628 2633 2632 ‚ The dinghy range of boom end fittings have been designed to provide an unparalleled leve...