Yacht Fittings

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line unc...

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

16mm AirBlocks offer very high working loads in an extremely small, lightweight block.These diminutive blocks feature a patented bearing system usi...

Use ball bearing Bullet blocks to lead control lines with a minimum of friction. A wide range of variations let these versatile blocks adapt to alm...

The 16mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses ...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Harken winch grease is a non-aging, high-adhesive synthetic lubricant with a temperature range from -200 degrees Celsius to 1500 degrees Celsius. I...

Self-contained sheaves are designed for sailors to use in custom applications.The Micro, Bullet and Big Bullet sheaves are Delrin with Delrin ball ...

Wire blocks are lightweight, low-friction blocks designed to carry wire halyards and control lines on boats of all sizes. To minimise friction fro...

Wire blocks have purpose deisgned narrow sheaves and grooves.Applications:Wire blocks suit halyards, vang and backstay applications Materials:Grade...

Carbo AirBlocks© are 60% stronger and 30% lighter than our classic blocks. Use the 40 mm Carbo for jib and mainsheet systems on high-performance di...

The nylon-resin sideplates are densely packed with long-glass fibers for a compact block with a high strength-to-weight ratio. Sheaves spin on high...

Carbo AirBlocks© are 60% stronger and 30% lighter than our classic blocks. Use the 40 mm Carbo for jib and mainsheet systems on high-performance di...

Use ball bearing Bullet blocks to lead control lines with a minimum of friction. A wide range of variations let these versatile blocks adapt to alm...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Hook-in block, ball bearing as used on the Optimist Blackgold racing masts.Due to the curved saddle the block for Optimist sailing rests against th...

Simple service kits are available to permit routine maintenance of Harken winches. Kits are available with drum screws, pawls and springs.

SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip permits low-load fast cr...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip permits low-load fast cr...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

Eyestraps provide a fairlead on cams and hold the line at the cleat.

Use cam swivel bases when leads must rotate to face the trimmer. The 240 and 241 are simple swivel bases for main and jib sheets on very small boat...

Use cam swivel bases when leads must rotate to face the trimmer. The 216 features a second cleat for lines led vertically through the base of the s...

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings to ensure that...

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

Wire fairleads maintain a low profile while holding the line close to the cleat. Use the HK298 wire fairlead with the HK150 and HK365 cleats to pla...

Eyestraps provide a fairlead on cams and hold the line at the cleat.Features: Height above cam: 12mm Length: 36mm Width: 11mm Weight: 4.5g Fastener...

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical. Carbon matrix pawl...

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world. Its tough Hardkote-anodised pawls and base are spec...

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical.Carbon matrix pawls...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees. The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. E...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Harken's 280 Offshore Cam-Matic is designed to complement the Midrange block series.It will accommodate line to 5/8" (16mm) and serves well in high...

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings. Specification...

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world.Its tough Hardkote-anodised pawls and base are speci...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

16mm AirBlocks offer very high working loads in an extremely small, lightweight block.These diminutive blocks feature a patented bearing system usi...

Springs are used to support blocks on padeyes, eye-straps, bases and traveller cars. Keeps blocks from hitting the deck. Features: A: 64mm B: 35mm ...

Springs are used to support blocks on padeyes, eye-straps, bases and traveller cars. Keeps blocks from hitting the deck. Features: A: 25mm B: 19mm ...

Springs are used to support blocks on padeyes, eye-straps, bases and traveller cars. Keeps blocks from hitting the deck. Features: A: 51mm B: 22mm ...