Yacht Fittings

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing gr...

Eyestraps provide a fairlead on cams and hold the line at the cleat.

Use cam swivel bases when leads must rotate to face the trimmer. The 240 and 241 are simple swivel bases for main and jib sheets on very small boat...

Use cam swivel bases when leads must rotate to face the trimmer. The 216 features a second cleat for lines led vertically through the base of the s...

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings to ensure that...

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

Wire fairleads maintain a low profile while holding the line close to the cleat. Use the HK298 wire fairlead with the HK150 and HK365 cleats to pla...

Eyestraps provide a fairlead on cams and hold the line at the cleat.Features: Height above cam: 12mm Length: 36mm Width: 11mm Weight: 4.5g Fastener...

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical. Carbon matrix pawl...

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world. Its tough Hardkote-anodised pawls and base are spec...

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical.Carbon matrix pawls...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees. The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. E...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Harken's 280 Offshore Cam-Matic is designed to complement the Midrange block series.It will accommodate line to 5/8" (16mm) and serves well in high...

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings. Specification...

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world.Its tough Hardkote-anodised pawls and base are speci...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

16mm AirBlocks offer very high working loads in an extremely small, lightweight block.These diminutive blocks feature a patented bearing system usi...

Springs are used to support blocks on padeyes, eye-straps, bases and traveller cars. Keeps blocks from hitting the deck. Features: A: 64mm B: 35mm ...

Springs are used to support blocks on padeyes, eye-straps, bases and traveller cars. Keeps blocks from hitting the deck. Features: A: 25mm B: 19mm ...

Springs are used to support blocks on padeyes, eye-straps, bases and traveller cars. Keeps blocks from hitting the deck. Features: A: 51mm B: 22mm ...

16mm AirBlocks offer very high working loads in an extremely small, lightweight block.These diminutive blocks feature a patented bearing system usi...