Yacht Fittings

The specially curved base is designed for fitting onto tubes from 29 to 32mm diameter. (1 1/8" to 1 1/4" diameter).Available in standard silver or ...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for throug...

The CL234 makes it simple to hang fenders. It is easy to adjust so your fenders are always positioned correctly. The cleat stays on the rope so not...

The bottom roller of the Clamcleat® C230AN allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface.  Can also be ri...

With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light ...

With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light ...

Low profile on flat surfaces. Also ideal for vertical surfaces. Portside cleat (see CL213 for starboard side) Marine grade black nylon.   Features...

Low profile on flat surfaces. Also ideal for vertical surfaces. Portside cleat (see CL214 for Port side) Marine grade black nylon.   Features: Rop...

The Clamcleat® C211MK2AN is a neat, compact alloy cleat with many uses for sailing, kitesurfing, sports equipment and industrial applications. Man...

The CL207 is a cost effective cleat that has a low profile on flat or vertical surfaces. One of the first non-marine uses for Clamcleat® produc...

The CL206 is a cost effective cleat that has a low profile on flat or vertical surfaces.One of the first non-marine uses for Clamcleat

With the CL205 the rope drops down into the teeth to give a quick, positive lock that is easy to release.The cleat is maufactured from UV resistant...

The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To releas...

The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To releas...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Ensures correct alignment of control lines into the cleat.       Applications: Suits medium C-Cleat and...

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits large C-Cleat and T-Cleat ...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

Wire fairleads maintain a low profile while holding the line close to the cleat. Use the HK298 wire fairlead with the HK150 and HK365 cleats to pla...

Eyestraps provide a fairlead on cams and hold the line at the cleat.Features: Height above cam: 12mm Length: 36mm Width: 11mm Weight: 4.5g Fastener...

Riser/Curved surface adaptor, suits medium C-Cleats and T-Cleats Weight: 30g

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical. Carbon matrix pawl...

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world. Its tough Hardkote-anodised pawls and base are spec...

Carbo-Cams are breakthrough plastic cleats designed for use on high-performance boats where weight and performance are critical.Carbon matrix pawls...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees. The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. E...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Harken's 280 Offshore Cam-Matic is designed to complement the Midrange block series.It will accommodate line to 5/8" (16mm) and serves well in high...

Use cam swivel bases when leads must rotate to face the trimmer. Ball bearing swivel bases feature dual rows of Delrin ball bearings. Specification...

The 150 Cam-Matic, the original ball bearing cam cleat, is still the most popular in the world.Its tough Hardkote-anodised pawls and base are speci...

A wedge kit is available for each cam. Cleats can be angled up to 15 degrees.The 150, 338, 365 and 423 cleats also fit flat or 15 degree risers. Ea...

Rope Fairlead to suit CC27 Clam Cleat (433-101-01R) Rope capacity:  3 - 7 mmHole spacing:  27 mmWeight:  14 g

Top Guide to suit Selden CC27 Cam Cleat (433-101-01R)   Rope capacity:  3 - 7 mm Hole spacing:  27 mm Weight:  3 g