Yacht Fittings

Cleats for 6 - 12 mm (1/4" - 1/2") rope CL804 - Tapered PadAids rope alignment. Tapered pad for CL201, CL219, CL219AN CL237 and CL238.Also m...

Aids rope alignment. Tapered pad for CL209, CL254 and CL254AN.Features:Material: PolypropyleneDimensions: 79mm x 24mmBolt Size: M5Screw Size: 4.8mm...

Wedge for CL204, 222. Length 2-1/4". Width 1-3/16". Features: Material: Polypropylene Dimensions: 57mm x 21mm Bolt Size: M4 Screw Size: 4.2mm Weig...

The specially curved base is designed for fitting onto tubes from 29 to 32mm diameter. (1 1/8" to 1 1/4" diameter).Available in standard silver or ...

The CL234 makes it simple to hang fenders. It is easy to adjust so your fenders are always positioned correctly. The cleat stays on the rope so not...

The bottom roller of the Clamcleat® C230AN allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface.  Can also be ri...

With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light ...

Low profile on flat surfaces. Also ideal for vertical surfaces. Portside cleat (see CL213 for starboard side) Marine grade black nylon.   Features...

Low profile on flat surfaces. Also ideal for vertical surfaces. Portside cleat (see CL214 for Port side) Marine grade black nylon.   Features: Rop...

The Clamcleat® C211MK2AN is a neat, compact alloy cleat with many uses for sailing, kitesurfing, sports equipment and industrial applications. Man...

The CL207 is a cost effective cleat that has a low profile on flat or vertical surfaces. One of the first non-marine uses for Clamcleat® produc...

The CL206 is a cost effective cleat that has a low profile on flat or vertical surfaces.One of the first non-marine uses for Clamcleat

The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To releas...

The principle of the converging tapered grooves ensures grip without wear. Simply lay the rope which will automatically cleat under load. To releas...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Ensures correct alignment of control lines into the cleat.       Applications: Suits medium C-Cleat and...

Used to keep the uncleated line within close proximity to the cleat, facilitating recleating.     Applications: Suits large C-Cleat and T-Cleat ...

Front mounted fairlead, suits small C-Cleat and T-Cleat. Allows precise cleating and release from any lead angle. Lower entry efforts for off-cent...

Lightweight Flairleads are top-mounted sculpted eyestraps.They feature stainless wearguards and are available in black, red, green, yellow or blue....

Wire fairleads maintain a low profile while holding the line close to the cleat. Use the HK298 wire fairlead with the HK150 and HK365 cleats to pla...

Eyestraps provide a fairlead on cams and hold the line at the cleat.Features: Height above cam: 12mm Length: 36mm Width: 11mm Weight: 4.5g Fastener...

Riser/Curved surface adaptor, suits medium C-Cleats and T-Cleats Weight: 30g

Can be used to correct alignment. Can be stacked in opposite directions to create a parallel riser. Backing plate distributes loads evenly under t...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...